Antigravity A1 Standard Bundle

What’s new?

Antigravity A1 introduces a different approach to aerial imaging by pairing a dual-lens 8K 360 camera with a compact folding drone. Rather than fixing a single forward-facing frame, the camera system records a complete sphere around the aircraft, while Insta360 stitching removes the drone from view so pilots see only the environment. FreeMotion flight control, Vision goggles with head tracking, and the Grip motion controller combine to decouple viewing direction from flight direction, allowing free exploration while maintaining a stable flight path.

Two standard flight batteries, a compact carry case and core accessories such as spare propellers, corrective-lens frames and USB-C cabling provide a complete starting kit without adding unnecessary bulk. The result is a ready-to-fly system that focuses on immersive 360 capture, straightforward motion control and simple packing for everyday travel.

Sensor and 360 capture

The Antigravity A1 uses a dual-lens arrangement with one ultra-wide optic above the airframe and one below, covering the whole sphere around the drone. The overlapping fields of view feed into an 8K 360 recording pipeline, where advanced stitching algorithms powered by Insta360 join the two streams into a seamless sphere. This set-up removes the drone and propellers from the final image, producing an invisible-drone effect that keeps the frame free of hardware and centred purely on the environment. In practice, pilots can review flights from any angle in post-production, extracting forward, top-down, side or rear perspectives.

Because Antigravity A1 captures the entire environment in a single pass, framing decisions move from the flight phase to the edit. Rather than aligning the drone's nose precisely during a fly-through, pilots can focus on safe flying and smooth paths, then reframe in 8K later for different outputs, such as 16:9 widescreen or 9:16 vertical clips. The “fly first, frame later” process reduces the risk of missed moments and avoids additional flights and battery cycles just to refine composition.

Immersive flight, Vision goggles and Grip controller

The flight platform is built around Antigravity’s FreeMotion system, combining the Grip motion controller with the Vision goggles. The Grip translates physical arm movement into drone motion, so pointing it in a direction and pulling the trigger sends the aircraft along that vector, rather than relying on dual-stick coordination. This reduces the learning curve for new pilots and keeps directional control intuitive when attention is focused on the live view.

The Vision Goggles receive the drone's 360° live feed and render it on dual 1” micro-OLED panels, each at 2560×2560 resolution with a 90° field of view. Head tracking links the viewing angle to the pilot’s head movement, so they can look freely around the 360 sphere while the drone continues on its chosen path. The optical system uses pancake optics with TÜV Rheinland-certified low blue-light output and built-in dioptre adjustment from approximately +2.0D to -5.0D, helping a wide range of users achieve clear focus without additional glasses.

Flight, weight and batteries

Folding arms and a compact body make the aircraft easy to pack into the supplied carry case, while its sub-250 g weight means it falls below registration thresholds in many regions. The airframe is rated for approximately Level 5 winds and a top speed of around 16 m/s in sport mode, providing enough headroom for general outdoor flying while maintaining stable control responses.

Two standard flight batteries allow pilots to alternate packs across short missions or training flights. Charging is handled via USB-C, and the bundle’s cables are compatible with PD-capable power sources when available. This combination of low take-off weight, folding structure and dual batteries makes the Standard Bundle suited to everyday backpack use, with enough power on hand for practice, scouting or casual 360 capture sessions.

Safety systems and operational support

Antigravity A1 incorporates several safety-oriented subsystems derived from its flight controller and sensing hardware. Front- and bottom-sensing hardware feed the obstacle-awareness logic, enabling the drone to monitor the path directly ahead and below, assisting with automated features such as return-to-home. When return-to-home is triggered, the aircraft calculates a path back to its recorded home point and uses its forward vision to respond to obstacles along the way.

A payload detection system monitors take-off weight and flags configurations that exceed the platform’s intended range. This feature helps to discourage unsafe loads or unauthorised modifications that would alter the drone’s handling characteristics. The automatic landing gear system extends legs when the drone powers on and retracts them after take-off, protecting the lenses during ground operations while keeping them clear of the 360 field in flight. Together, these measures support safer operation for both new and experienced pilots without interfering with the core 360 capture.

Know the rules!

The UK’s drone rules are based on the risk of the flight—where you fly, the proximity to other people, and the size and weight of your drone. Any drone with a camera, regardless of weight, will require an Operator ID. However, an additional Flyer ID is required for drones weighing 250g and over. Other qualifications are still needed for commercial drone use, and even then, this doesn't mean you can fly your drone anywhere. Ensure you know the rules and consult the Drone Code before you fly; if you want to fly commercially, you must take the PfCO CAA exam (Permission for Commercial Operations).

What's in the box?

• 1 x Antigravity A1 Drone
• 1 x Grip Motion Controller
• 1 x Controller Strap
• 1 x Vision Goggles
• 1 x Goggles Head Strap
• 1 x Goggle Foam Padding
• 1 x Goggles Lens Caps
• 1 x Goggles Battery Lanyard
• 1 x Goggles USB-C to DC Power Cable
• 1 x Goggles Battery
• 1 x Flight Battery
• 1 x USB-C Cable
• 1 x Spare Propellers (1.5 sets as supplied)
• 1 x Screwdriver
• 1 x Drone Carry Case
• 2 x Corrective Lenses Frame
• 1 x Lens Cloths