The Manfrotto 035 Super Clamp (without stud) is an ideal clamp for photographic applications including camera support, lighting and car rigs. Features and ergonomic lever to securely lock clamping position. The Manfrotto superclamp supports up to 15kg. Please note: No studs or spigots are included with this item. Please click the accessories tab.
The Manfrotto 143R kit includes a Magic Arm and Superclamp. The Manfrotto Magic Arm is a versatile aluminium support arm with a central locking lever. Each end features a Type 17 attachment and the arm can secure loads of up to 3kg. Manfrotto's Superclamp is an ideal clamp for photographic applications including camera support, lighting and car rigs. the
The Manfrotto 196B-2 Single Articulated Arm supports 1 kg at full extension and extra versatility is provided by the sliding extension system which allows for easier positioning of lighting fixtures even in awkward and tight spaces. The maximum length of the arm is 605mm (23.8 inches) and the bottom 5/8" spigot (compatible with the Superclamp), also has
Mounts on any column with 3/8" thread, this side arm allows positioning of two heads on a 90° perpendicular angle.
Half ball for levelling video heads on Video tripods provided with 75mm bowl.
The Manfrotto 042 Extension Arm attaches to the 035 Super Clamp. It is 19.5cm long and constructed from lightweight aluminium. Attachment is via type 1 + spigot art.013 female attachment.
The Manfrotto 014-38 is a 5/8 inch (16mm) Female Adapter, designed to fit atop an 5/8 inch lighting stand top stud in order to allow vertical or horizontal mounting of accessories with a 3/8 inch thread receptor.
3/8" Female to 1/4" Male adaptor for tripods.
Articulated arm with large locking knob. Variable friction and locking of arm obtained by adjusting the knob. Supplied with quick release camera plate with secondary safety lock based on the 200PL-14 camera plate mechanism. Ideal for mounting a photographic or video camera exactly at the angle you need it. Fits any 5/8" female socket, works especially well
Perfect for macro photography and creating low-angle shooting positions, the low angle adapter is placed on the top of a new 190 Series tripod casting, in place of the centre column. This allows the legs to be spread ultra-wide and hence the tripod's top to be positioned extremely close to the ground.
The 520BALLSH comes complete with a short locking handle to mount all Manfrotto flat-base heads to any 75mm bowl tripod including the 529B Hi-Hat (with optional adapter 319).
The 438 is fitted between tripod and head and provides easy, fast levelling for tripods without built-in levelling mechanisms. Its range of movement is 10°.
The Manfrotto 015 Special Adapter is an adapter with a 1/4" screw attachment thread on one side and a 3/8" female thread on the other.
The Manfrotto 244 Arm is a jointed aluminium camera arm with an adjustable, locking friction joint in the centre. One end is equipped with a camera/umbrella bracket, while the other features a Type 17 attachment.
Made of sturdy aluminium, this 25 x 35cm platform can support up to 20kg. It is ideal as a projector or monitor stand.
This universal short 16 mm spigot with double male threads; one 1/4'' and the other 3/8''.
This all-steel adaptor converts a 1/4" screw to 3/8" screw.
Designed for advanced video shooting, the Manfrotto Full Fluid Base (MVMXPROBASE) for XPRO Monopod (not included) is the first of its kind in the market to feature 3D fluidity for the ultimate smoothness in an extremely compact solution for advanced video shooting. Compatible with all XPRO Photo Monopods, with the exception of the MMXPROA3B.
Attach to tripod feet or monopods to provide stability in snow, mud or soft ground (set of 3). For tripods: 190D, 190CL, 190PRO, 190NAT3, 190MF3, 190MF4, 055D, 055CL, 055PRO, 055NAT3, 055MF3, 055MF4, 458B, 028, 475, 058 and 161MK2. Diameter: 138mm
The Manfrotto 036-14 Lighting Stud plugs into the 035 Super Clamp for lighting fixtures or connecting 2 Super Clamps 035 allowing them to rotate. It has a 1/4" male thread.
Mounts on any column with 3/8" thread, this side arm allows positioning of two heads on a 90° perpendicular angle.
The Manfrotto 125 is an adapter spigot which features a 3/8 inch thread on each end.
The Manfrotto E650 is a 6 inch long pin, 5/8 inch diameter with 7/8 inch collar to prevent the pin from sliding through a grip clamp.
Reversible stud for mountimg cameras on the Manfrotto Super Clamp. 3/8" and 1/4" thread.
The Manfrotto 337 is a double axis spirit level that mounts to the hot shoe of any standard SLR camera in order to help you achieve a finer degree of accuracy and consistency in panoramic photo sequences. Spirit levels are useful tools for both landscape and studio photography.
The Manfrotto 208HEX Hex Mounting Adapter 's main feature is the hexagonal pin, which, compared to the 208's round one, gives more grip when used to hold heavy cameras mounted on photo or video heads in combination with accessories like the super clamp 035. The 3/8inch thread allows Manfrotto tripod heads to be attached securely.
The Manfrotto 066 Double Female Thread Stud plugs into the 035 Super Clamp to provide either a 3/8" or 1/4" female thread fixing.
The Manfrotto 148KN is a small adapter and has a 3/8" screw attachment type and a 1/4" female thread attachment type (set of 5). The Manfrotto 148KN has a length of 0.18 inches, is made of nickel steel and weighs 0.02 lbs.
The Manfrotto 015 Special Adapter is an adapter with a 3/8" screw attachment thread on one side and a 1/4" female thread on the other.
This adapter spigot features a 3/8 inch thread on one end and a 1/4 inch thread on the other.
Black version of the 131DD. Mounts on any column with 3/8" thread, this side arm allows positioning of two heads on a 90° perpendicular angle plus 2 positionable heads along the arm, which means you can hold a total of 4 heads/cameras.
The Manfrotto F1000 Pump Cup is ideal for mounting small lights, cameras, scrims, gobos, magic arms or articulated arms onto flat, non-porous surfaces such as glass. It features a ball-joint socket which rotates within a half hemisphere and is the perfect tool for rigging car shoots.
The Manfrotto Heavy Duty Flexible Arm allows you to precisely position and hold lighting and camera equipment weighing up to 0.5kg. Constructed from 18mm diameter flexible brass tube with a 3/8” female thread on one end (which will fit onto the Manfrotto Super Clamp 035), and a 1/4” male thread on the other end.
The 338 is fitted between tripod and head and is used in combination with tripods that don't have built-in levelling mechanisms. Its three adjustment dials enable the operator to make fine, finger tip adjustments up to +/- 5 degrees to ensure the camera is perfectly level. The dials also have locking rings to ensure stability once the right position is
The Manfrotto 119 3/8F to 1/4F Adaptor Spigot is a universal short 16 mm spigot with double female threads, 1/4'' and 3/8'' in size.
The Manfrotto 014-14 16mm Female Adapter is a locking adapter which fits on to any light stand with a 5/8" top stud and allows vertical or horizontal mounting of a light fixture, flash, or camera which has a 1/4" thread.
The Manfrotto 196AB-2 is a two-section articulated arm. The top attachment is a 16mm (3/8 inch) spigot light attachment while the bottom attachment is via a a 16mm spigot (compatible with light attachment Superclamp) with 1/4 inch thread.
Flash shoe adaptor with a 1/4 inch Male attachment. Attach to the 035 Superclamp and that to a lighting stand to hold your flashgun in the studio.
The Manfrotto Virtual Reality Panoramic Head allows cameras to rotate on horizontal and vertical axes. Accepting a payload of up to 4kg, the VR Panoramic Head enables photo stitching software to produce precise composed VR images from a simple DSLR. Cameras can fit onto this rig via a Manfrotto 375PLV base plate.
Support for medium telephoto lens. The length of the bracket is adjustable to take different length lenses and different diameters by tilting the Tilt Head 234RC (included). Length from head to lens support adjustable from 200 to 295mm. Attachments: 4 x 3/8" female and 3 x 1/4" female.
The Manfrotto 237 Flexible Arm is a handy tripod accessory with a multitude of uses. It has a 13mm diameter, is 55cm long, with hexagon stud to fit Super Clamp 035 with 3/8'' female thread on one end and a 16mm stud with 1/4'' male thread type 18 on the other.
Working with the centre column in the horizontal position on the Manfrotto 055PRO, 190PRO, NEOTEC and MDEVE tripod families has always caused a slight difficulty, in that the head remains at 90° to the ground making it more difficult to position the camera correctly for shooting. Now this simple adapter enables the camera to be correctly positioned to achieve
The 500BALLSH comes complete with a short locking handle to mount all Manfrotto flat-base heads to the 529B Hi-Hat.
Your extra arm in the studio. One lever locks three pivot points. Supplied with a quick release camera plate with secondary safety lock based on the 200PL-14 system. Ideal for mounting a camera or a camcorder exactly at the angle you need it. Fits any 5/8" female sockets, works especially well with 035 Super Clamp.
Designed to fit to the top end of any make of Monopod to give additional stability. Adjustable length with pivoting shoulder support. Especially useful for providing smooth panning shots.
Worn on a belt, this easy to use pouch offers support for the base of a Monopod.
Manfrotto is entering the Virtual Reality space offering a complete range of products to facilitate shooting 360° video. This Manfrotto VR Pump Cup with Spigot Adapter enables the capture of spherical VR content by flexibly supporting 360 degree cameras on a variety of surfaces.
Three compartments hang below the column supported by straps above the leg locks. Fits most Manfrotto tripods. A blisteringly useful bit of kit, that ensures that you don't need to delve into your pockets or bag for commonly needed items.
The Manfrotto 195 Adapter fits into the 5/8 inch (16 mm) receiver of the Manfrotto Sky Hook 2970, allowing the use of cameras or accessories with a 1/4"-20 female tap.
The Manfrotto 356 includes a Manfrotto 234 Monopod Tilt Head and is designed to fix a CCTV or photographic camera to a wall via a 1/4 inch thread. The sturdy aluminium bracket has a maximum load capacity of 2.5kg.
Similar to the Manfrotto 131D with the addition of two positional head mounts on the side arm allowing the possible mounting of four heads. Mounts onto any 3/8" column. Aluminium construction. 30.7cm column travel.
Converts tripod head screw from 3/8" threads to 5/8". Material: Aluminium. Attachment (top): 5/8'' screw. Attachment (bottom): 3/8" female thread
This Manfrotto 196AB-3 3 Section Arm is an articulated arm which can be afixed to a tripod or similar mount in order to position accessories with precision. The arm can firmly and steadily hold 1kg at its full 85cm extension. The top attachment is a 16mm spigot 3/8'' light attachment, while the bottom is a 16mm spigot (compatible with Superclamp) with 1/4''
Designed to securely hold binoculars, allowing binoculars without a traditional tripod moutning thread to be attached to a tripod. The 035BN binocular clamp has a load capacity of 15kg. Clamp range round tube: 13-55mm. Attachment (bottom): 16mm hexagonal + M5 & 1/4" threads.
Allows use of 3/8" camera mounting plate in 16mm socket. Compatible with 035 Super Clamp and 484RC2 or 486RC2 Ball Head, plus many more.
Manfrotto 522SCA spare cable for 521, 522 and 523. 2.5 mm (0.1) male/male jack coiled cord cable measuring 25cm (extendable to 50cm) supplied as standard with all the Videocamera Remote Control units.
Manfrotto is entering the Virtual Reality space offering a complete range of products to facilitate shooting 360° video. This Manfrotto VR Adjustable Dolly enables the capture of spherical VR content by supporting 360 degree cameras while being unobtrusive.
This adapter is 50mm long and has a threaded 3/8 inch female socket at the bottom, and a 5/8 inch stud at the top.
Manfrotto Telescopic Accessory Pan Bar for 503 video head.
Manfrotto is entering the Virtual Reality space offering a complete range of products to facilitate shooting 360° video. This Manfrotto VR Super Clamp enables the capture of spherical VR content by providing a range of flexible mounting options while being unobtrusive.