The 520BALLSH comes complete with a short locking handle to mount all Manfrotto flat-base heads to any 75mm bowl tripod including the 529B Hi-Hat (with optional adapter 319).
The 438 is fitted between tripod and head and provides easy, fast levelling for tripods without built-in levelling mechanisms. Its range of movement is 10°.
The Manfrotto MBAG70N is an unpadded tripod bag, which is slightly tapered to provide a better fit for your tripod with attached head. A zip extends down the length of the bag and also fully opens the top section, and its end caps are padded to further protect your tripod. Please note: the internal length of this tripod bag is 68cm. If you currently own
The Manfrotto Tripod Shoulder Strap allows you to carry the tripod comfortably across your shoulder and attaches easily under the head of the tripod and around the tripod feet.
The Manfrotto MBAG60N is a lightweight unpadded tripod bag made to protect your tripod with mounted head. Its asymmetric tapered shape allows you to store the tripod with the head attached and tripod legs fit comfortably in the narrower end. The main zipper extends down the full length of the bag while wrapping around the top area to easily open and grab
The MBAG75PN is a lightweight padded tripod bag made to protect your tripod with mounted head. Its asymmetric tapered shape allows you to store the tripod with the head attached and tripod legs fit comfortably in the narrower end. The main zipper extends down the full length of the bag, while wrapping around the top area to easily open and grab your tripod.
The Manfrotto 208HEX Hex Mounting Adapter 's main feature is the hexagonal pin, which, compared to the 208's round one, gives more grip when used to hold heavy cameras mounted on photo or video heads in combination with accessories like the super clamp 035. The 3/8inch thread allows Manfrotto tripod heads to be attached securely.
Half ball for levelling video heads on Video tripods provided with 75mm bowl.
The largest bag in the range, the MBAG120P is padded to protect your equipment and has the following features: Asymmetric tapered shape allows you to store the tripod with the head attached. Tripod legs fit comfortably in the narrower end (diameter 20cm) and extra space is allowed for the larger volume of the head at the wider end (diameter 23cm). Please
The Manfrotto MBAG80N is an unpadded tripod bag, which is slightly tapered to provide a better fit for your tripod with attached head. The wider end of the bag accommodates the head without requiring all levers to be removed. Please note; the internal length of this tripod bag is 77cm.
The MBAG 90PN is padded to protect your equipment and features an asymmetric tapered shape fitting a tripod with the head attached. Tripod legs fit comfortably in the narrower end (diameter 20cm - 7.87") and extra space is allowed for the larger volume of the head at the wider end (diameter 23cm - 9"). This also means it's easier to put the tripod and head
Reversible stud for mountimg cameras on the Manfrotto Super Clamp. 3/8" and 1/4" thread.
This all-steel adaptor converts a 1/4" screw to 3/8" screw.
3/8" Female to 1/4" Male adaptor for tripods.
Attach to tripod feet or monopods to provide stability in snow, mud or soft ground (set of 3). For tripods: 190D, 190CL, 190PRO, 190NAT3, 190MF3, 190MF4, 055D, 055CL, 055PRO, 055NAT3, 055MF3, 055MF4, 458B, 028, 475, 058 and 161MK2. Diameter: 138mm
Articulated arm with large locking knob. Variable friction and locking of arm obtained by adjusting the knob. Supplied with quick release camera plate with secondary safety lock based on the 200PL-14 camera plate mechanism. Ideal for mounting a photographic or video camera exactly at the angle you need it. Fits any 5/8" female socket, works especially well
The Manfrotto 119 3/8F to 1/4F Adaptor Spigot is a universal short 16 mm spigot with double female threads, 1/4'' and 3/8'' in size.
The Manfrotto 015 Special Adapter is an adapter with a 1/4" screw attachment thread on one side and a 3/8" female thread on the other.
The Manfrotto 014-14 16mm Female Adapter is a locking adapter which fits on to any light stand with a 5/8" top stud and allows vertical or horizontal mounting of a light fixture, flash, or camera which has a 1/4" thread.
The Manfrotto 015 Special Adapter is an adapter with a 3/8" screw attachment thread on one side and a 1/4" female thread on the other.
The Manfrotto 125 is an adapter spigot which features a 3/8 inch thread on each end.
The Manfrotto 244 Arm is a jointed aluminium camera arm with an adjustable, locking friction joint in the centre. One end is equipped with a camera/umbrella bracket, while the other features a Type 17 attachment.
The Manfrotto E650 is a 6 inch long pin, 5/8 inch diameter with 7/8 inch collar to prevent the pin from sliding through a grip clamp.
The Manfrotto 014-38 is a 5/8 inch (16mm) Female Adapter, designed to fit atop an 5/8 inch lighting stand top stud in order to allow vertical or horizontal mounting of accessories with a 3/8 inch thread receptor.
This adapter spigot features a 3/8 inch thread on one end and a 1/4 inch thread on the other.
The Manfrotto 143R kit includes a Magic Arm and Superclamp. The Manfrotto Magic Arm is a versatile aluminium support arm with a central locking lever. Each end features a Type 17 attachment and the arm can secure loads of up to 3kg. Manfrotto's Superclamp is an ideal clamp for photographic applications including camera support, lighting and car rigs. the
Perfect for macro photography and creating low-angle shooting positions, the low angle adapter is placed on the top of a new 190 Series tripod casting, in place of the centre column. This allows the legs to be spread ultra-wide and hence the tripod's top to be positioned extremely close to the ground.
The Manfrotto MBAG75N is a lightweight unpadded tripod bag made to protect your tripod with mounted head. Its asymmetric tapered shape allows you to store the tripod with the head attached and tripod legs fit comfortably in the narrower end. The main zipper extends down the full length of the bag while wrapping around the top area to easily open and grab
This short centre column is an optional alternative to the longer column supplied as standard with the newest 055 Series tripods. Its smaller size enables easier tripod operation when working with in a close-to-ground position, such as when composing low-angle shots and for macro photography.
This universal short 16 mm spigot with double male threads; one 1/4'' and the other 3/8''.
The MBAG 80PN is padded to protect your equipment and features an asymmetric tapered shape fitting a tripod with the head attached. Tripod legs fit comfortably in the narrower end (diameter 15cm) and extra space is allowed for the larger volume of the head at the wider end (diameter 21cm). This also means it is easier to put the tripod and head in the bag,
A set of dedicated spiked feet for the Manfrotto 055XPROB/CX3/CXPRO3 tripods. The spike is made from anodised aluminium designed to be resistant to corrosion and can be covered by a retractable rubber foot for use on hard surfaces. A dedicated fitting tool is supplied.
Provide a more comfortable carrying system for MDEVE and 190/055WNB + PRO tripods. This carrying handle can be adjusted in length to better balance the tripod during transportation.
The Manfrotto 066 Double Female Thread Stud plugs into the 035 Super Clamp to provide either a 3/8" or 1/4" female thread fixing.
Flash shoe adaptor with a 1/4 inch Male attachment. Attach to the 035 Superclamp and that to a lighting stand to hold your flashgun in the studio.
The Manfrotto 337 is a double axis spirit level that mounts to the hot shoe of any standard SLR camera in order to help you achieve a finer degree of accuracy and consistency in panoramic photo sequences. Spirit levels are useful tools for both landscape and studio photography.
The 338 is fitted between tripod and head and is used in combination with tripods that don't have built-in levelling mechanisms. Its three adjustment dials enable the operator to make fine, finger tip adjustments up to +/- 5 degrees to ensure the camera is perfectly level. The dials also have locking rings to ensure stability once the right position is
The Manfrotto 036-14 Lighting Stud plugs into the 035 Super Clamp for lighting fixtures or connecting 2 Super Clamps 035 allowing them to rotate. It has a 1/4" male thread.
The Manfrotto 148KN is a small adapter and has a 3/8" screw attachment type and a 1/4" female thread attachment type (set of 5). The Manfrotto 148KN has a length of 0.18 inches, is made of nickel steel and weighs 0.02 lbs.
The Manfrotto 160SPK3 set consists of 3 rubber/metal spiked feet for tripods with a lower leg-section diameter of 16mm. The spike is made of a special hard anodised aluminium alloy extremely resistant to corrosion and the feet are supplied with a dedicated tool to make fixing and removal easier. This set will fit the Manfrotto 055CXPRO4, 190XB, 190XDB,
The MBAG100PN is a padded tripod bag, slightly tapered to provide a better fit for your tripod with attached head. The wider end of the bag accommodates the head without requiring all levers to be removed. Zip extends down the length of the bag, but also fully opens the top end of the bag. Logo end cap is padded to offer protection to the tripod head. Can
The Manfrotto 035 Super Clamp (without stud) is an ideal clamp for photographic applications including camera support, lighting and car rigs. Features and ergonomic lever to securely lock clamping position. The Manfrotto superclamp supports up to 15kg. Please note: No studs or spigots are included with this item. Please click the accessories tab.
Mounts on any column with 3/8" thread, this side arm allows positioning of two heads on a 90° perpendicular angle.
Mounts on any column with 3/8" thread, this side arm allows positioning of two heads on a 90° perpendicular angle.
The Manfrotto 196B-2 Single Articulated Arm supports 1 kg at full extension and extra versatility is provided by the sliding extension system which allows for easier positioning of lighting fixtures even in awkward and tight spaces. The maximum length of the arm is 605mm (23.8 inches) and the bottom 5/8" spigot (compatible with the Superclamp), also has
The Manfrotto Heavy Duty Flexible Arm allows you to precisely position and hold lighting and camera equipment weighing up to 0.5kg. Constructed from 18mm diameter flexible brass tube with a 3/8” female thread on one end (which will fit onto the Manfrotto Super Clamp 035), and a 1/4” male thread on the other end.
The Manfrotto 237 Flexible Arm is a handy tripod accessory with a multitude of uses. It has a 13mm diameter, is 55cm long, with hexagon stud to fit Super Clamp 035 with 3/8'' female thread on one end and a 16mm stud with 1/4'' male thread type 18 on the other.
The Manfrotto 042 Extension Arm attaches to the 035 Super Clamp. It is 19.5cm long and constructed from lightweight aluminium. Attachment is via type 1 + spigot art.013 female attachment.
The MB MBAG100PNHD is a padded tripod bag with a larger diameter head to fit larger heads capable of shooting video, made to protect your tripod with mounted head which features the following: Asymmetric tapered shape allows you to store the tripod with the head attached. Tripod legs fit comfortably in the narrower end. Main zipper extends down the full
Designed for advanced video shooting, the Manfrotto Full Fluid Base (MVMXPROBASE) for XPRO Monopod (not included) is the first of its kind in the market to feature 3D fluidity for the ultimate smoothness in an extremely compact solution for advanced video shooting. Compatible with all XPRO Photo Monopods, with the exception of the MMXPROA3B.
Manfrotto’s padded tripod bag for the Befree tripod provides protection when out and about. An adjustable shoulder strap makes it an ideal fit for all users and the padding provides further protection. The Manfrotto Befree tripod fits snuggly in the bag.
Made of sturdy aluminium, this 25 x 35cm platform can support up to 20kg. It is ideal as a projector or monitor stand.
The Manfrotto F1000 Pump Cup is ideal for mounting small lights, cameras, scrims, gobos, magic arms or articulated arms onto flat, non-porous surfaces such as glass. It features a ball-joint socket which rotates within a half hemisphere and is the perfect tool for rigging car shoots.
Universal tripod spreader with variable diameter width controls from 80mm to 130mm. It accepts spiked tip tripod.
The Manfrotto Virtual Reality Panoramic Head allows cameras to rotate on horizontal and vertical axes. Accepting a payload of up to 4kg, the VR Panoramic Head enables photo stitching software to produce precise composed VR images from a simple DSLR. Cameras can fit onto this rig via a Manfrotto 375PLV base plate.
The Manfrotto 196AB-2 is a two-section articulated arm. The top attachment is a 16mm (3/8 inch) spigot light attachment while the bottom attachment is via a a 16mm spigot (compatible with light attachment Superclamp) with 1/4 inch thread.
Black version of the 131DD. Mounts on any column with 3/8" thread, this side arm allows positioning of two heads on a 90° perpendicular angle plus 2 positionable heads along the arm, which means you can hold a total of 4 heads/cameras.
Working with the centre column in the horizontal position on the Manfrotto 055PRO, 190PRO, NEOTEC and MDEVE tripod families has always caused a slight difficulty, in that the head remains at 90° to the ground making it more difficult to position the camera correctly for shooting. Now this simple adapter enables the camera to be correctly positioned to achieve
Worn on a belt, this easy to use pouch offers support for the base of a Monopod.
Three compartments hang below the column supported by straps above the leg locks. Fits most Manfrotto tripods. A blisteringly useful bit of kit, that ensures that you don't need to delve into your pockets or bag for commonly needed items.